Jump to Navigation

Podcasts that I dig

Network Break 158: Cisco Announces Predictive Services; KRACK Attack

packetpushers - 6 hours 29 min ago
Today's Network Break dives into Cisco's new predictive services, the KRACK vulnerabilities, HPE's step back from cloud servers & giant fighting robots. The post Network Break 158: Cisco Announces Predictive Services; KRACK Attack appeared first on Packet Pushers.
Categories: Podcasts that I dig

eevBLAB #38 – Digikey & The US Government Watchlist!

EEV BLog - 13 hours 20 min ago

Digikey are checking orders against the US Denied Persons list and holding orders until you can prove your generic name is not that person on the list.
Also, Element14 doing a similar thing

Forum HERE

Categories: Podcasts that I dig

EEVblog #1032 Part 5 – John Kenny Keysight Interview

EEV BLog - 13 hours 25 min ago

Interview with John Kenny from Keysight
Final part 5 of 5

This one covers the design of the 34460 multimeter, dc-dc converter design, cost targets, isolation, 34410a sales, contract manufacturers, production lines, chip packages, the 34460a 1000V spec mistake, IEC61010 Rev3 new challenges in product design, safety hazards and standards, floating design, certified power bricks, standby power consumption, power factor correction, how PFC is now zero cost, real power switches, soft power buttons, cost targets for products, and the art of low cost product design,

John Kenny is presently the Technology and Efficiency Manager for the Electronic Instruments and Systems Group. After graduating from Lehigh University in 1978, he started in Hewlett Packard, working in our Modular Power System team, designing modular supplies, and later moved to our Lab and Industrial Power group, where he was involved in Analog, Digital and Firmware design for the next 20 years, involved in the rollout of our many programmable power products. In 2005, he moved into a new role as the Technology Manager for the System Products Group, which covered all of the GP products, including Power Products, DMMs, Function Generators, Counters and Data Acquisition products. He was directly involved in the development of the breadth of the GP products that you see in the Keysigt catalog today, with more on their way. Recently, as part of the reorganization in 2015 as part of the new Keysight, he became responsible for Technology and Efficiency management for most of our non-RF based products, as part of the EISG Center of Excellence, which includes products developed in Japan, Penang, Singapore, Loveland and Budd Lake.

Categories: Podcasts that I dig

EEVblog #1032 Part 4 – John Kenny Keysight Interview

EEV BLog - 13 hours 26 min ago

Interview with John Kenny from Keysight
Part 4 of 5, released daily, stay tuned!
Patrons and forum supporters will get all the videos early.

This one covers product counterfeiting, clone products,education market, downconversion vs direct RF sampling,disruptions in manufacturing, consumer electronics,led lighting,the future of test and measurement, the future of knobs, gesture control, confidence in PSU’s, velocity controls,design teams vs the individual designer,the failure of imagination, function gens in scopes,project code names, easter eggs and code space, product time lines.

John Kenny is presently the Technology and Efficiency Manager for the Electronic Instruments and Systems Group. After graduating from Lehigh University in 1978, he started in Hewlett Packard, working in our Modular Power System team, designing modular supplies, and later moved to our Lab and Industrial Power group, where he was involved in Analog, Digital and Firmware design for the next 20 years, involved in the rollout of our many programmable power products. In 2005, he moved into a new role as the Technology Manager for the System Products Group, which covered all of the GP products, including Power Products, DMMs, Function Generators, Counters and Data Acquisition products. He was directly involved in the development of the breadth of the GP products that you see in the Keysigt catalog today, with more on their way. Recently, as part of the reorganization in 2015 as part of the new Keysight, he became responsible for Technology and Efficiency management for most of our non-RF based products, as part of the EISG Center of Excellence, which includes products developed in Japan, Penang, Singapore, Loveland and Budd Lake.

Categories: Podcasts that I dig

EEVblog #1032 Part 3 – John Kenny Keysight Interview

EEV BLog - 13 hours 27 min ago

Interview with John Kenny from Keysight
Part 3 of several more to come, released daily, stay tuned!
Patrons and forum supporters will get all the videos early.

This one covers Design teams, web UI interfaces, firmware issues, regression testing, automated testing, 3458A, losing talent, 8.5 digit bench meter?, testing throughput, LTZ1000 reference history, transfer standards, design effort, understanding competitors, learning from competitors, the importance of forums, bloggers and reviews, tearing down competitor products, Trueform DDS technology, FPGA Pipelining, product timing synchronisation, IEEE1588, picosecond LAN timing sync, non-engineers, arduino’s and raspberry Pi’s, automotive industry, driverless cars.

John Kenny is presently the Technology and Efficiency Manager for the Electronic Instruments and Systems Group. After graduating from Lehigh University in 1978, he started in Hewlett Packard, working in our Modular Power System team, designing modular supplies, and later moved to our Lab and Industrial Power group, where he was involved in Analog, Digital and Firmware design for the next 20 years, involved in the rollout of our many programmable power products. In 2005, he moved into a new role as the Technology Manager for the System Products Group, which covered all of the GP products, including Power Products, DMMs, Function Generators, Counters and Data Acquisition products. He was directly involved in the development of the breadth of the GP products that you see in the Keysigt catalog today, with more on their way. Recently, as part of the reorganization in 2015 as part of the new Keysight, he became responsible for Technology and Efficiency management for most of our non-RF based products, as part of the EISG Center of Excellence, which includes products developed in Japan, Penang, Singapore, Loveland and Budd Lake.

Categories: Podcasts that I dig

EEVblog #1032 Part 2 – John Kenny Keysight Interview

EEV BLog - 13 hours 30 min ago

Interview with John Kenny from Keysight
Part 2 of several more to come, released daily, stay tuned!
Patrons and forum supports will get all the videos early.

This one covers the early days of PCB tools, Rubylith, gerber copying, simulation, EEsoft RF design and layout tool, Sabre by Synopsis, Matlab, Simulink, Windows CE development and discontinuation in 2021, what Microsoft does well, software bloat, Windows CE support in microcontrollers, Linux, RTOS’s, product boot time, the problems with open source software, the Linksys router, repair, product schematics, clones, design patents, the importance of trade secrets, Chinese company prosecution, creating the Rigol monster, buying companies, IOT web security and zombie multimeters!

John Kenny is presently the Technology and Efficiency Manager for the Electronic Instruments and Systems Group. After graduating from Lehigh University in 1978, he started in Hewlett Packard, working in our Modular Power System team, designing modular supplies, and later moved to our Lab and Industrial Power group, where he was involved in Analog, Digital and Firmware design for the next 20 years, involved in the rollout of our many programmable power products. In 2005, he moved into a new role as the Technology Manager for the System Products Group, which covered all of the GP products, including Power Products, DMMs, Function Generators, Counters and Data Acquisition products. He was directly involved in the development of the breadth of the GP products that you see in the Keysigt catalog today, with more on their way. Recently, as part of the reorganization in 2015 as part of the new Keysight, he became responsible for Technology and Efficiency management for most of our non-RF based products, as part of the EISG Center of Excellence, which includes products developed in Japan, Penang, Singapore, Loveland and Budd Lake.

Categories: Podcasts that I dig

Show 362: Advanced Network Programmability With Cisco (Sponsored)

packetpushers - Fri, 10/20/2017 - 13:45
On today s Packet Pushers show, sponsored by Cisco, we discuss device programmability, network modeling with YANG, and the IOS XR Service-Level API. The post Show 362: Advanced Network Programmability With Cisco (Sponsored) appeared first on Packet Pushers.
Categories: Podcasts that I dig

PQ 132: YANG All The Things – IETF 99

packetpushers - Thu, 10/19/2017 - 09:13
Recorded live at IETF 99, today's Priority Queue is a conversation about network automation and the YANG data modeling language. Our guest is Sue Hares. The post PQ 132: YANG All The Things – IETF 99 appeared first on Packet Pushers.
Categories: Podcasts that I dig

Geek Shock #409 - The Whole But Fractured

Ugly Couch Show - Wed, 10/18/2017 - 17:52

So much NEWS... We talk about CBS All Access numbers, Hellraiser, The Fractured But Whole, Thrilling Adventure Hour, Flight of the Navigator, Hocus Pocus, The Unquenchable Thirst of Dracula, Marvel Phase 4, The Talisman, Long Lost Shada, Tag and Bink, Locke & Key, Terminator continuity, Dead Inside, Westworld, Preacher, Cult of Chucky, Monsters' Shrink, Red Rush, Underworld, The Changeling, Vampire: The Masquerade, Xenogenesis, The Secret World, Roswell, The Fifth Season, and The Valliant.

Categories: Podcasts that I dig

Datanauts 106: Controlling AWS Costs

packetpushers - Wed, 10/18/2017 - 11:43
The Datanauts explore how to control cloud costs with guest Corey Quinn, a consultant and Amazon observer who shares his insights and experience on understanding and managing your cloud spend. The post Datanauts 106: Controlling AWS Costs appeared first on Packet Pushers.
Categories: Podcasts that I dig

EEVacademy #7 – Designing Combinatorial Digital Logic Circuits

EEV BLog - Wed, 10/18/2017 - 01:42

How do you convert a logic truth table into a digital logic circuit?
Dave shows you how with the Sum Of Products method.
Forum HERE

Categories: Podcasts that I dig

EEVblog #1032 Part 1 – John Kenny Keysight Interview

EEV BLog - Wed, 10/18/2017 - 01:40

Interview with John Kenny from Keysight
Part 1 of several more to come, released daily, stay tuned!
Patrons and forum supports will get all the videos early.

This one covers the history earlier days of HP, Bill & Dave and their philosophy, early recruitment, the design centres, cash cows, HP-Agilent-Keysight name changes. Keysight vs Danaher/GE business systems, life sciences, Carly Fiorina and renaming Hewlett Packard to HP, the Keysight Black look’n’feel change, the stock market, designing the 34460A and 34401A, system design efficiency, PCB design, FPGA vs ASIC’s, price points, analog vs dsp power supply design, simulation, engineering recruitment,

John Kenny is presently the Technology and Efficiency Manager for the Electronic Instruments and Systems Group. After graduating from Lehigh University in 1978, he started in Hewlett Packard, working in our Modular Power System team, designing modular supplies, and later moved to our Lab and Industrial Power group, where he was involved in Analog, Digital and Firmware design for the next 20 years, involved in the rollout of our many programmable power products. In 2005, he moved into a new role as the Technology Manager for the System Products Group, which covered all of the GP products, including Power Products, DMMs, Function Generators, Counters and Data Acquisition products. He was directly involved in the development of the breadth of the GP products that you see in the Keysigt catalog today, with more on their way. Recently, as part of the reorganization in 2015 as part of the new Keysight, he became responsible for Technology and Efficiency management for most of our non-RF based products, as part of the EISG Center of Excellence, which includes products developed in Japan, Penang, Singapore, Loveland and Budd Lake.

Forum HERE

Categories: Podcasts that I dig

GDPR and You with Seb Matthews

Run As Radio - Tue, 10/17/2017 - 23:00
In May 2018, the EU General Data Protection Regulation laws take effect. Are you ready? Richard chats with Seb Matthews about what IT Pros can do to get ready for the GDPR. The regulations are broad, covering personally identifiable information, data breaches, the right to be forgotten and more. Whether you're an EU company or just do business with EU residents, the GDPR can affect you. Seb talks about the six Ps to compliance: Placement, Process, People, Products, Privacy and Protection. And he also digs into how Microsoft can help with a number of great tools as part of Azure, Office 365 and more. Yet another reason to get to the cloud!
Categories: Podcasts that I dig

Full Stack Journey 014: Robert Kloosterhuis

packetpushers - Tue, 10/17/2017 - 09:57
The Full Stack Journey continues with guest Robert Kloosterhuis (a.k.a The Fluffy Admin), who joins Scott to discuss finding a balance between hands-on experience and broader knowledge. The post Full Stack Journey 014: Robert Kloosterhuis appeared first on Packet Pushers.
Categories: Podcasts that I dig

Network Break 157: Cisco Launches ACI 3.0; More Security Blues

packetpushers - Mon, 10/16/2017 - 10:22
This week's Network Break analyzes tech news from Cisco, HPE, Dell, and more. The post Network Break 157: Cisco Launches ACI 3.0; More Security Blues appeared first on Packet Pushers.
Categories: Podcasts that I dig

Geek Shock Lost Episode: DIY - The Kerstan and Andy Show

Ugly Couch Show - Sat, 10/14/2017 - 11:47

Recorded during our hiatus a few days after the Las Vegas Shooting, Kerstan and Andy get together to Geek Shock a little.

Categories: Podcasts that I dig

Show 361: Future Of Networking With Brighten Godfrey

packetpushers - Fri, 10/13/2017 - 12:52
The Packet Pushers' Future Of Networking series continues with guest Brighten Godfrey, CTO and cofounder of Veriflow. We'll talk about intent-based networking and some of the mathematics behind this emerging approach to networking. The post Show 361: Future Of Networking With Brighten Godfrey appeared first on Packet Pushers.
Categories: Podcasts that I dig

BIB006: Barefoot Networks And Google Team Up On P4 Runtime

packetpushers - Thu, 10/12/2017 - 15:52
Barefoot Networks and Google have collaborated to release P4 Runtime, software that enables a controller to communicate with programmable switch silicon, including Barefoot's Tofino chip. The post BIB006: Barefoot Networks And Google Team Up On P4 Runtime appeared first on Packet Pushers.
Categories: Podcasts that I dig

PQ 131: Whitebox At LinkedIn – IETF 99

packetpushers - Thu, 10/12/2017 - 09:03
Our Priority Queue series from IETF 99 continues with a conversation about whitebox switching at LinkedIn. Our guests are Shawn Zandi and Russ White. The post PQ 131: Whitebox At LinkedIn – IETF 99 appeared first on Packet Pushers.
Categories: Podcasts that I dig

BIB005: PathSolutions Demo Impressions

packetpushers - Thu, 10/12/2017 - 00:00
PathSolutions CTO Tim Titus demoed their TotalView product for the Packet Pushers. Ethan Banks shares his impressions. The post BIB005: PathSolutions Demo Impressions appeared first on Packet Pushers.
Categories: Podcasts that I dig

Pages

Subscribe to http://dagobah-system.com aggregator - Podcasts that I dig


Main menu 2

Dracula